Meaning
Physical forces act upon electronic assemblies when materials with different expansion rates undergo temperature changes. The thermo-mechanical strain describes the tension or compression that develops at the interface of a component and a board during heating cycles. This stress is a primary cause of failure in systems that experience frequent temperature fluctuations.
Expansion Coefficient
Every material in an electronic assembly expands at a different rate when heated. When thermo-mechanical strain occurs, the solder joints are pulled in different directions as the ceramic package of a chip and the organic substrate of the board expand at different speeds. The difference in these coefficients determines the magnitude of the force.
Joint Fatigue
Repeated cycles of heating and cooling cause small cracks to form in the metal of the solder connections. Under high thermo-mechanical strain, these cracks grow until the electrical connection is lost entirely. This process is often seen in automotive electronics or outdoor equipment where the environment is not controlled.
Structural Integrity
Reducing the impact of these forces requires careful selection of materials and board layout. Techniques for mitigating thermo-mechanical strain involve using flexible adhesives or choosing components with lead frames that can absorb some of the movement. Understanding the limits of the assembly ensures that the product can survive the expected lifecycle without mechanical failure.