Meaning
Semiconductor packaging requires the establishment of electrical paths between the silicon die pads and the leadframe terminals. This joinery technique represents thermosonic wire bonding, which combines heat, pressure, and ultrasonic energy to weld fine gold or copper wire. The boundary of the process starts with the forming of the wire ball and ends when the second bond is severed.
It operates at lower temperatures than pure thermocompression.
Process Parameter
High-frequency transducers supply vibration while a heated stage maintains substrate warmth. Executing thermosonic wire bonding requires precise calibration of the ultrasonic power and the bond force. Adjusting these values prevents cracking the silicon under the bond pad.
Capillary selection also affects the bond shape.
Joint Formation
Atomic diffusion occurs at the interface without melting the parent metals. During thermosonic wire bonding, the ultrasonic energy scrubs away oxide layers to expose clean metal surfaces. This scrub action allows the applied force to create a solid-state weld in milliseconds.
Thermal energy accelerates this atomic diffusion.
Reliability Testing
Physical pull tests measure the mechanical strength of the finished loop. If thermosonic wire bonding is not properly optimized, the wire will peel off the pad under low force. Quality control laboratories run destructive shear tests to verify the integrity of the weld.
Consistent results ensure long-term package reliability.