Meaning
Unwanted signal interference created by the non linear mixing of two or more frequencies within a radio frequency system. The presence of third-order imd is particularly problematic because the resulting distortion products often fall within the desired frequency band of the receiver. Intermodulation distortion cannot be easily filtered out once it has been generated.
Distortion is measured in decibels relative to the carrier and marks the linearity of power amplifiers and antennas.
Product Generation
Mathematical combinations of the fundamental frequencies produce these distortion components at specific intervals. In a system experiencing third-order imd, the products appear at twice the frequency of one signal minus the frequency of the other. Harmonic peaks grow much faster than the fundamental signals as power levels increase.
The relationship is defined by the third order intercept point which characterizes the dynamic range of the device.
System Impact
Receiver sensitivity decreases when these interference products rise above the noise floor. Because third-order imd can originate in connectors or cables through passive non-linearity, every component in the signal path must be evaluated. Poorly tightened connectors or oxidized contacts are common sources of this problem in high power antenna systems.
Signal distortion degrades the signal to noise ratio and reduces the effective data rate of the wireless link.
Measurement Protocol
Testing for this distortion requires two signal generators and an analyzer. The third-order imd level is recorded across varying power levels. Engineering teams use this data to qualify components for use in multi carrier base stations.
High quality components are selected to ensure that the distortion products remain below the threshold that would trigger a regulatory failure.