Meaning
Theoretical power level defines a figure of merit for the linearity of an amplifier or frequency mixer by identifying where intermodulation products equal the fundamental signal level. Engineers use third-order output intercept point to characterize the ability of a receiver to handle strong interfering signals near the desired frequency. A higher value indicates better resistance to distortion in crowded radio environments.
Nonlinear Distortion
Nonlinearity in the active components creates unwanted spectral components when multiple signals are present at the input. The third-order output intercept point specifically tracks the growth of products that fall close to the original signals and cannot be easily filtered out. These products increase in power by three decibels for every one decibel increase in the input signal level.
Intercept Calculation
Measurement of this value involves applying two closely spaced tones to the device and measuring the resulting third-order products at the output. Mathematical extrapolation of the fundamental power curve and the distortion curve identifies the point where they theoretically cross. Designers apply a standard offset of approximately ten decibels between the one-decibel compression point and the calculated third-order output intercept point in typical broadband amplifiers.
System Linearity
Overall receiver sensitivity is often limited by the noise floor and the distortion levels defined by this parameter. High third-order output intercept point values are necessary in base stations and infrastructure equipment where large numbers of signals must be processed simultaneously without interference. Selecting components with sufficient linearity ensures that the communication link maintains a low bit error rate even in the presence of strong adjacent channel signals.