Meaning
A physical model designed to replicate the electrical and thermal properties of human tissue is utilized in laboratory testing to measure the specific absorption rate of electromagnetic radiation emitted by wireless devices. This testing apparatus typically consists of a plastic shell shaped like a human head or body, which is filled with a specialized liquid mixture of water, salt, and gelling agents. Using a tissue equivalent phantom ensures that the measured radio frequency energy absorption is representative of actual human exposure during device operation.
Material Composition
The chemical mixture used to fill the model must be calibrated to match the specific permittivity and conductivity of human tissue at the test frequency. Sourcing and preparing the liquid for the tissue equivalent phantom requires precise measurement of its dielectric properties before each test sequence. The liquid recipe is adjusted depending on whether the test is simulating head or body exposure, as different tissues have distinct electrical characteristics.
Regular calibration prevents measurement drift and ensures the repeatability of the test results.
Testing Methodology
The placement of the wireless device relative to the model mimics typical usage scenarios, such as holding a phone against the ear or placing a module in a pocket. Inside the tissue equivalent phantom, a robotic arm moves a miniature electric field probe through the liquid to scan for the region of highest energy absorption. This automated scan locates the spatial peak and calculates the averaged specific absorption rate.
This standardized procedure provides a consistent and defensible baseline for comparing the emissions of different wireless products.
Regulatory Certification
The documented test results obtained using the physical model are mandatory for demonstrating compliance with international safety guidelines. Certification bodies require that the tissue equivalent phantom used during testing meets the mechanical and dielectric specifications defined by international standards. The measurement reports generated during these tests are included in the handover package submitted for regulatory approval.
This validation ensures that the wireless module can be safely deployed in commercial products without posing a risk to the user.