Meaning
Specific absorption rate measurements use simulated human body materials to quantify the amount of radio frequency energy absorbed by the body. The tissue simulant fluid consists of a liquid mixture formulated to replicate the dielectric properties of human tissue at specific frequencies. This medium fills the phantom models used during laboratory testing of mobile devices.
Electromagnetic Matching
Replicating the complex permittivity and conductivity of human flesh requires precise chemical formulation. Water, salt, and organic solvents are blended to match the electrical properties of muscle or brain tissue at the target frequency. The tissue simulant fluid must match these properties closely to ensure that the measured power deposition is accurate.
Even minor deviations in salt concentration can alter the electrical conductivity, leading to incorrect assessment of transmitter heating effects.
Calibration Protocol
Dielectric properties of the liquid change over time due to evaporation and temperature fluctuations. Technicians measure the permittivity of the mixture using coaxial probe methods before each test sequence. The temperature of the fluid must be maintained within a narrow window to prevent measurement drift.
Safety Assessment
Quantification of wireless exposure limits protects consumers from excessive radio frequency heating. Testing against a standardized tissue simulant fluid ensures that different devices can be compared on an equal basis. These evaluations are mandatory for all consumer devices worn on or held close to the body.