Meaning
Evaluation of simultaneous exposure from multiple radio sources requires a mathematical comparison of the individual specific absorption rate values against the regulatory limits. The co located transmitter sar ratio represents this combined exposure when two or more antennas operate within a shared physical boundary of a device. System integrators compute this value to ensure that the cumulative radiation remains within safe thresholds even when individual radios comply on their own.
Summation Method
Calculation procedures add the ratios of each active radio to form a cumulative index. This co located transmitter sar ratio calculation takes the measured absorption value of each transmitter and divides it by the corresponding limit before adding them together. If the sum stays below unity, the device passes the simultaneous transmission requirement without requiring further complex laboratory testing.
Compliance Threshold
Exceeding the limit triggers a mandatory transition to more complex spatial evaluation methods. When the co located transmitter sar ratio equals or exceeds one, developers must perform volumetric SAR summation or multi-transmitter measurements.
Integration Variable
Module integration must account for physical spacing because antenna separation distances modify the coupling effects between transmitters. The co located transmitter sar ratio changes when antennas are repositioned during the layout phase of the printed circuit board. Device housing materials and shielding placement also influence how the energy distributes across the tissue during evaluation.
Correct management of these board-level parameters prevents expensive redesign cycles during the final fcc certification phase.