Meaning
Chemical mixtures formulated to mimic the dielectric properties of human flesh are used in the assessment of radio frequency absorption. Tissue simulation liquid fills the phantom head or body used during specific absorption rate testing for mobile phones and wearable devices. The fluid must accurately match the permittivity and conductivity of the body part it represents at a specific frequency.
Material Composition
Recipes for these fluids typically involve a base of deionized water mixed with salt and sugar. Different ratios are required for tissue simulation liquid intended for head measurements versus those used for trunk simulations.
Measurement Precision
Accurate assessment of the energy absorbed by the body depends on the stability of the medium. Before starting a test, the technician measures the dielectric parameters of the tissue simulation liquid to confirm they fall within the tolerances allowed by the standard. Probes are then dipped into the tank to map the electric field generated by the device under test.
Measurement consistency is verified by repeating the scan at different depths within the liquid.
Compliance Standard
Global regulations specify the exact properties that the fluid must exhibit for the results to be valid. Using the wrong tissue simulation liquid will produce an incorrect reading that could either mask a safety issue or cause a compliant device to fail. Regular calibration of the measuring equipment and the fluid itself is a mandatory part of the laboratory quality system.