Meaning
Surface degradation process in electrical contacts accelerated by microscopic movement between two metal surfaces under load. Small-scale vibrations, often called fretting, break down the protective lubrication and expose fresh metal to oxygen, leading to tribological oxidation. The resulting oxide layer is non-conductive and creates high resistance or intermittent signal loss in the connection.
Fretting Mechanism
Thermal expansion and mechanical vibration cause the contact points to shift by just a few micrometers. This cycle of exposure and rubbing in tribological oxidation produces a fine black or brown powder known as wear debris. Over time, this debris accumulates in the contact zone and physically separates the mating surfaces.
Resistance Profile
Circuits affected by this process show a sudden and unpredictable increase in voltage drop. Because tribological oxidation creates a semiconducting layer, the contact might pass high-voltage signals while failing to transmit low-power digital data. Engineers use periodic cycling or increased contact force to temporarily punch through the oxide film during testing.
Material Selection
Using noble metals like gold or palladium prevents the underlying metal from reacting with the air. Even with these coatings, tribological oxidation can occur if the plating is thin enough for the base metal to diffuse to the surface. Specifying a thick nickel underplate and high-viscosity synthetic lubricants minimizes the risk of this failure mode in automotive and industrial electronics.