Meaning
Radiated emissions compliance procedures require mapping maximum electromagnetic radiation profiles against spatial orientation and antenna height benchmarks. A turntable pre-scan is an automated exploratory measurement sequence where a motorized platform rotates the device under test through three hundred sixty degrees while a spectrum analyzer records peak field strengths. Test software executes this rapid sweep using peak detection mode to identify critical azimuth angles across a broad frequency spectrum.
Test engineers use the resulting signal list to reduce full compliance dwell times on non-critical frequencies. The scope covers initial exploratory orientation sweeps and excludes final quasi-peak regulatory compliance measurements.
Angle Sweep
Continuous rotation at elevated turntable speed allows fast coverage across all azimuths in shielded anechoic chambers. Executing a turntable pre-scan with a fast peak detector captures transient emissions that might be missed during slow step-and-dwell routines.
Peak Detection
Automated algorithms compare raw signal amplitudes against pre-configured threshold limits to generate a candidate frequency list.
Final Maximization
Critical frequencies identified during exploratory testing undergo secondary maximization where the platform turns slowly to the exact peak angle while the antenna mast adjusts height. Operating a turntable pre-scan shortens total chamber time while preserving measurement thoroughness. Test execution logs attach these preliminary angular plots to the final electromagnetic compatibility report.