Meaning
Radio frequency identification systems require a continuous wave of constant amplitude and frequency to energize passive transponders before data transmission begins. The use of an unmodulated carrier pulse allows the receiving tag to charge its internal power storage capacitor. This signal does not contain any data payload, acting purely as a power delivery mechanism.
Signal Characteristic
The reader transmits this constant envelope wave for a specific duration, typically several milliseconds, preceding the command block. This signal has a narrow bandwidth, which concentrates the radiated power within the allocated channel limits. During this phase, the tag’s rectifier circuit converts the received radio frequency voltage into a stable direct current.
This voltage must exceed the startup threshold of the internal processor.
Hardware Interface
Engineers measure the rise time and frequency stability of the signal during the transmitter characterization phase. If the pulse has excessive overshoot or frequency drift, it can cause the tag’s receiver to reset or malfunction. This analysis is conducted with a high-speed spectrum analyzer connected to the reader’s RF port.
The test limits are defined in the regulatory compliance standards for short-range devices.
Power Constraint
Pulse duration must be long enough to fully charge the tag’s capacitor but short enough to prevent excessive power consumption. High-speed protocols minimize this power-up window to maximize data throughput.