Meaning
Rate-dependent inelastic deformation occurring in materials subjected to mechanical or thermal loading is modeled to predict long-term structural behavior. This material response, called viscoplasticity, combines the behaviors of viscous flow and plastic deformation. Unlike standard plasticity, the deformation rate under constant stress depends heavily on time and temperature.
In microelectronics integration, this behavior is a primary factor in the fatigue life of solder balls under cyclic thermal loads.
Stress Relaxation
When a viscoplastic material is held at a constant strain, the stress required to maintain that strain decays over time. This relaxation occurs as the internal elastic energy is converted into plastic strain. In board-level assemblies, this process relieves the initial stress on the solder joints but can lead to accumulation of plastic damage.
Understanding this relaxation helps engineers design assemblies that avoid early solder joint failure.
Modeling Application
Finite element solvers use constitutive equations to simulate these time-dependent strain changes under cyclic conditions. These simulations predict where damage will accumulate in the solder balls during thermal cycling tests. The results help engineers choose the best combinations of board materials, underfills, and chip packages.
It ensures that the final product can withstand years of thermal cycling without electrical failure.
Experimental Testing
Characterizing viscoplastic behavior requires running mechanical tests at different temperatures and strain rates. Technicians perform tensile tests at multiple speeds to measure changes. This experimental data fits the simulation models.