Meaning
Evaluation of a multi-radio device involves calculating the combined electromagnetic output when all collocated transmitters operate at maximum power. Analysis of worst case simultaneous transmission identifies the peak exposure levels when cellular and Wi-Fi radios transmit at the same time. This scenario represents the highest possible risk to the hardware.
Compliance is achieved by showing that the sum of the ratios remains below the limit.
Cumulative Exposure
Summation of the individual radio contributions provides a total value for comparison against safety standards. In a worst case simultaneous transmission, the power density of each source is weighted by its specific limit. If the total exceeds the unity value, the device requires additional shielding or power management.
This calculation must account for the spatial separation between antennas because a greater distance reduces the overlap of the fields in a specific volume of tissue.
Calculation Logic
Application of the formula for simultaneous transmission relies on the results from the individual radio tests. The worst case simultaneous transmission assessment uses the highest measured value for each band rather than the average. This conservative approach ensures that the device is safe under all possible operating conditions.
Design Validation
Verification of the thermal and electromagnetic performance during the prototyping stage prevents costly redesigns late in the project. Managing a worst case simultaneous transmission often requires careful placement of the antennas to maximize isolation. Successful validation in this state guarantees that the product will be stable in the hands of the consumer.