Meaning
RF transmission interfaces designed for operation up to 220 GHz provide the necessary pathway for millimeter-wave signals in high-frequency test systems. Precision-engineered 0.5 mm coaxial connectors utilize an air dielectric and a specialized interface to minimize insertion loss at these frequencies. They are used in advanced measurement setups where signal integrity is paramount.
Mechanical Fit
Pin and socket configurations must align perfectly to prevent damage to the delicate center conductor. High-frequency 0.5 mm coaxial connectors feature a thread-on locking mechanism that ensures a stable, repeatable connection. This physical alignment is critical for maintaining a continuous impedance profile across the entire interface.
Even a slight eccentricity during mating will degrade the electrical response. The assembly requires a torque wrench to prevent over-tightening.
Frequency Limit
Electromagnetic waves propagate through the coaxial structure without moding only below a specific cutoff. The design of 0.5 mm coaxial connectors allows them to operate reliably up to 220 GHz. This represents the practical limit of coaxial technology before transition to waveguide.
Signal Loss
Attenuation increases rapidly with frequency due to skin effect in the metal conductors. Using 0.5 mm coaxial connectors requires low-loss substrate launches to minimize the impedance discontinuities that cause reflections. These components are characterized by a low standing wave ratio up to their maximum rating.