Meaning
Federal regulations in the United States mandate that intentional radiators must operate without causing harmful interference to licensed services. Within these rules, 47 cfr part 15 subpart c establishes the specific technical requirements and emission limits for unlicensed transmitters. Handover certification documents for finished hardware products depend directly on compliance with these rules.
Regulatory Constraint
Emission limits for spurious signals represent a major engineering boundary when integrating wireless hardware. Under 47 cfr part 15 subpart c, the radio design must limit radiated power outside the designated bands to prevent pollution of the radio spectrum. System integrators must verify that their antennas do not exceed the gains permitted by the original module manufacturer.
Compliance Testing
Laboratory measurements of the integrated system are performed by accredited laboratories to verify adherence to emission rules. The testing procedure involves sweeping the frequency band to locate harmonic frequencies and measure field strength. If a host system introduces unexpected noise, it can cause the module to fail certification.
Engineers rely on pre-compliance scans to identify issues before committing to final official regulatory testing at the test house.
Integration Risk
Host enclosure shielding can change the radiated pattern of an embedded transmitter. Modifying the host design after certification sometimes requires a permissive change filing with the regulatory body. This process introduces delays if unanticipated emissions are detected late in the product development cycle.