Meaning
Iterative phase retrieval algorithms reconstruct a complex wavefront by cycling estimates between non-overlapping spatial or modal constraint sets until the transformation settles within acceptable boundary tolerances. When planar near-field antenna scanners measure only power magnitude across two parallel surfaces, alternating projections recover the lost modal phase distribution without requiring an explicit reference receiver channel. The computational routine maps field amplitudes between the aperture plane and measurement planes via the two-dimensional Fourier transform, repeatedly enforcing measured scalar intensities in the observation space and physical support limits in the source space.
The algorithm stops applying where evanescent waves dominate the reactive near field, because spatial attenuation removes the high-order wavevectors before they can reach the recording planes.
Algorithmic Progression
Field reconstruction begins by loading measured scalar amplitudes from the first acquisition plane into a complex array containing an initial uniform or randomized phase estimate. Forward propagation through plane wave expansion shifts this synthesized distribution to the second measurement distance, where the calculated amplitude array is discarded and replaced with the physical magnitude captured by the receiver. An inverse propagation step then returns the modified wave back to the primary plane, where measured values again overwrite the synthetic amplitude while preserving the updated phase profile.
Repeating this cyclic replacement generates progressive phase corrections that reduce spatial discrepancies between the numerical representation and the physical radiation boundary. Stagnation occurs if the initial phase estimate drives the computation into local minima caused by phase wraps or geometric symmetries. Perturbations injected into the spatial domain break these non-physical equilibrium states without requiring changes to the raw scan coordinates.
Phase Ambiguity
Planar near-field phase reconstruction without interferometric hardware encounters mathematical degeneracies whenever the radiator exhibits spatial or rotational symmetry. Symmetrical planar arrays produce conjugate phase distributions that yield identical scalar field intensities across both measurement distances, causing alternating projections to converge toward inverted phase profiles. Including a third scan plane or enforcing an asymmetric physical boundary condition on the antenna enclosure eliminates this modal uncertainty.
Handover Validation
Laboratory verification files record the spatial root mean square error between the measured amplitude profile and the reconstructed wave after each projection cycle. The resulting compliance report pairs this convergence trace with holographic back-projections down to the printed circuit board level to isolate parasitic surface currents before sign-off. Cross-checking the calculated far-field pattern against calibrated spherical range measurements confirms that the reconstructed aperture phase distribution aligns with actual hardware behavior.