Meaning
Standardized nitric acid vapor exposure procedures measure macro-porosity and structural defects in precious metal electroplating applied over copper or nickel bases. Quality assurance protocol astm b735 subjects electroplated gold contact surfaces to concentrated nitric acid fumes inside a sealed glass chamber for a defined duration at ambient temperature. Chemical reaction between the vapor and exposed base metal forms visible corrosion products at pore sites without attacking the noble gold layer itself.
Qualification testing relies on this exposure to reveal discontinuous plating before board assemblies undergo final system integration.
Exposure Protocol
Vapor generation requires specified nitric acid concentration inside an airtight desiccator held at seventy percent relative humidity. Test coupons or stamped contact pins hang suspended above the acid liquid level for sixty minutes. Substrate reaction produces blue or green metal salt mounds that mark substrate exposure points.
Visual inspection under ten times magnification quantifies pore density per square millimeter against acceptable threshold limits specified in component procurement documentation.
Defect Threshold
Unacceptable pore counts indicate sub-optimal plating bath chemistry or inadequate substrate cleaning prior to deposition. Corrosion sites exceeding fifty micrometers in diameter fail high-reliability connector acceptance criteria for aerospace or telecommunications hardware. High pore counts create direct pathways for atmospheric sulfur and chlorine to attack nickel underplates.
Microscopic discontinuities cause contact resistance growth over thermal aging cycles.
Production Verification
Production line audits execute astm b735 on sample lots prior to surface-mount assembly. Passing this test sequence validates plating integrity before high-value board assemblies undergo automated component placement.