Meaning
Temporal coordinates marking the start of a connection event establish the baseline from which all scheduled radio packet exchanges proceed between central and peripheral nodes. A bluetooth low energy anchor point defines this recurrent time reference, determining when the central device initiates transmission to a synchronized peripheral. In connection mode, every subsequent packet transfer within that specific event derives its timing offset from this initial instant.
The specification fixes the separation between consecutive markers as an integer multiple of 1.25 milliseconds within the range of 7.5 milliseconds to 4.0 seconds. The governing boundary stops at the packet boundary of the initial exchange, leaving subsequent packet spacing within the same event to inter-frame spacing intervals rather than the original timing marker.
Jitter Compensation
Hardware real-time clocks driving low-power sleep oscillators introduce phase uncertainty between connection intervals. Peripheral receivers track this relative drift by measuring the time-of-arrival error of the first central transmission against the predicted bluetooth low energy anchor point. Firmware phase-locked loops apply corrective offsets to the local timing registers, realigning internal wake counters to prevent packet misalignment.
Accumulated drift that exceeds half the radio receiver window leads to packet loss. Consistent realignment preserves radio duty cycles during sustained tracking.
Power Consequence
Baseband controllers schedule power-rail transitions and high-frequency crystal oscillator startup routines relative to each expected timing boundary. The peripheral baseband initiates transceiver ramp-up several hundred microseconds before the projected bluetooth low energy anchor point to achieve phase-locked loop stability and receiver sensitivity prior to the incoming preamble. Missing an anchor point forces the receiver to stay active across an extended listening interval.
This prolonged operational state consumes milliampere-range currents that rapidly drain electrochemical cells. Accurate timing predictions preserve sub-microampere average sleep currents.
Protocol Boundary
Reconfiguration procedures alter the temporal placement of connection boundaries through dedicated control sequences. The central device transmits a connection update indication payload containing an instant field that defines the precise event counter value for applying new interval parameters. Both transceivers calculate the placement of the revised bluetooth low energy anchor point using this common event counter index, eliminating link renegotiation delays.
Packet retransmissions occurring inside the existing event do not alter the scheduled location of subsequent markers. The anchor sequence maintains fixed periodicity until deliberate channel-map or connection-update transactions overwrite the active schedule.