Meaning
A software mapping process associates the logical pins of a boundary-scan device with their physical package pins. This association, referred to as boundary scan cell binding, utilizes the Boundary Scan Description Language (BSDL) file to link the physical package to the internal scan logic. The binding step ensures that the test generation software knows exactly which register bit controls each physical pin.
It represents an essential step in board-level test development.
Pin Association
Each silicon pad corresponds to a specific cell in the internal boundary-scan register. During boundary scan cell binding, the software reads the package map to determine the physical coordinate and pin name of each cell. This mapping must handle different package types like ball grid arrays or quad flat packs.
If the mapping is incorrect, the generated test patterns will target the wrong physical locations.
Automation Procedure
Electronic design automation tools typically perform this binding step automatically during the board compilation phase. The tool parses the schematic netlist and the device BSDL files. Once loaded, it matches the device designator with the corresponding file, ensuring every pins is accounted for.
This automated step accelerates the board design flow by eliminating manual cross-referencing of signal names. It also generates an error log if any discrepancies occur, such as a missing pin or an unsupported pad type.
Verification Metric
The output of the binding is verified using simulation models of the board layout. A mismatch during boundary scan cell binding produces incorrect fault diagnostic results during production. Designers execute loopback tests to confirm that every bound cell responds to the shift clock as expected before releasing the test program.