Meaning
Fabrication strategies that construct multilayer circuit boards sequentially from the inner core outward establish complex routing structures. The build up method adds insulating and conductive layers one at a time using microvias for interconnection. This approach allows for high density routing required by modern small packages.
It stops applying when standard mechanical drilling suffices for layer connection.
Interconnection Technology
Laser drilling creates extremely small holes that connect adjacent layers without penetrating the entire board. These microvias occupy very little board surface area. They enable a higher density of signal traces than would be possible with mechanical drills.
Space is saved on outer surfaces for component pads.
Lamination Sequence
Sequential processing applies dielectric film and copper foil over the prepared core layer by layer. The board is heated and pressed to cure the resin before the next pattern is etched. This cycle repeats for each pair of layers added.
Precision registration is required to ensure that microvias align with their target pads on lower layers.
Substrate Performance
Thin dielectric materials used in this process improve thermal dissipation across the board assembly. This mechanical property reduces the risk of trace cracking during thermal cycling. Thinner layers also support controlled impedance for high-speed signals.