Meaning
High-speed boundary scan routines applied to multi-die packages verify the continuity and performance of the micro-bumps and TSVs that link separate silicon tiles. Execution of chiplet interconnect testing occurs primarily during the assembly phase after the individual dies are placed on the common silicon interposer or organic substrate. This verification ensures that high-density links operate reliably without signal leakage or crosstalk before the module is sealed.
Validation Protocol
The test process relies on built-in self-test circuits embedded within each die to generate and analyze test patterns at full functional speed. This local generation avoids the physical limitations of external automatic test equipment when probing microscopic wafer pads. These methods of chiplet interconnect testing can isolate high-frequency signal degradation to a single micro-bump interface.
Yield Management
Defective connections identified during the evaluation can be bypassed by routing signals through redundant lanes built into the architecture. This automated recovery protects the high-cost multi-die assembly from failures that would otherwise render the entire package unusable. Standard chiplet interconnect testing is therefore a primary tool for securing acceptable production yields.
Hardware Design
Physical spacing and thermal limits dictate the placement of the test routing and probe pads on the silicon. These considerations influence how chiplet interconnect testing is implemented across the floorplan of the system in package.