Meaning
Switch-mode power stages utilize transient switching to minimize power dissipation during active transition states. A class-e pa uses a single-pole switch and a reactive load network to ensure that the active device switches only when voltage and its derivative are both zero. This zero-voltage switching technique drastically reduces turn-on losses.
Switching Behavior
Achieving high efficiency requires the transistor to function as an ideal switch rather than a current source. In a class-e pa, the load network shapes the voltage across the transistor so that the voltage reaches zero before the current begins to rise. This behavior eliminates the capacitive discharge loss that typically limits high-frequency transmitters.
Consequently, the power stage maintains high efficiency even at high radio frequencies.
Design Parameter
Reactance values in the output network govern the transition timings of the switching waveform. For a class-e pa, the shunt capacitance and the series tuned circuit must be tuned to specific mathematical ratios based on the operating frequency and load resistance. Any deviation from these calculated values degrades the soft-switching conditions.
This sensitivity demands precise component tolerances in high-volume production.
Operational Boundary
Impedance mismatch at the antenna port can disrupt the zero-voltage switching condition. When the load impedance varies, the voltage across the switch in a class-e pa may not return to zero before conduction starts, causing a rapid increase in heat generation. To protect the semiconductor from thermal stress, designers must include isolators or active tuning circuits between the power amplifier and the antenna.
Without these protective measures, load variations caused by user movement can destroy the active device during operation.