Meaning
Physical and electrical separation measured in decibels that prevents two or more wireless radios from interfering with each other within the same device. Coexistence isolation ensures that a powerful cellular transmitter does not blind a nearby sensitive Wi-Fi receiver. This metric is fundamental to the performance of multi-radio gateways and smartphones.
Antenna Placement
Distance between radiating elements acts as the primary tool for achieving this separation. While the casing size limits spatial gap, coexistence isolation is often improved by orienting antennas in different polarizations. Mechanical designers must balance the aesthetic requirements of the enclosure with these radio frequency needs.
Filtering Performance
Surface acoustic wave components provide the necessary rejection of signals from adjacent frequency bands. High coexistence isolation values are reached when the filter attenuates the transmit power of one radio before it reaches the input of another. This rejection prevents the saturation of the low noise amplifier.
System Stability
Testing during the integration phase confirms that both radios maintain their throughput even when operating simultaneously. Without sufficient coexistence isolation, the software may be forced to use time-division multiplexing to prevent data loss. This workaround reduces the total available bandwidth for the user.
In extreme cases, the lack of isolation leads to dropped connections or permanent hardware damage from excessive signal power leakage. The firmware usually includes a fallback mechanism to throttle the transmit power of the aggressor radio if the interference level exceeds a safe threshold.