Meaning
Constant electromagnetic signal transmitted without modulation for the purpose of testing radio frequency performance. Engineers use these signals to measure the peak power and harmonic content of a radio without the interference of data packets. During continuous wave emission, the transmitter operates at a fixed frequency to provide a stable baseline for regulatory testing.
The state allows for the precise characterization of the power amplifier and antenna match.
Thermal Stress
Operating a radio in this mode generates the maximum possible heat within the silicon and the surrounding board. Sustained output at full power during continuous wave emission tests the limits of the thermal management system, including heat sinks and thermal interface materials. Design verification requires monitoring the junction temperature to ensure it remains below the failure point during long test cycles.
The enclosure must dissipate the energy effectively to prevent performance throttling or permanent damage to the soldering joints. Effective pathways for heat transfer to the ground plane are necessary for high-power components. Measuring the temperature rise over time provides the data needed to set safe operating limits for the final product.
Regulatory Limit
Compliance standards define the maximum allowed leakage into adjacent frequency bands. Testing with an unmodulated carrier during continuous wave emission reveals the purity of the oscillator and the effectiveness of the filtering stages. Spurious emissions are easier to identify when the primary signal is a single, sharp peak.
Spectral masks provide the boundary that the hardware must not cross.
Signal Purity
Clean output depends on the stability of the frequency source and the linearity of the signal path. Phase noise in the carrier can indicate power supply issues or poor grounding on the printed circuit board. High-fidelity results confirm that the integration of the radio module has not introduced noise.
Reliable transmission relies on a stable carrier.