Meaning
Power reduction that occurs when a passive microwave component is placed in the main transmission path. Measurements of directional coupler insertion loss account for the energy diverted to the coupled port and the energy lost to heat. This value is expressed in decibels and remains separate from the coupling factor itself.
Low values are desirable to maintain signal integrity in high-power transmitters.
Signal Attenuation
Dielectric and conductor losses within the internal lines contribute to the drop in power level. When calculating the link budget, directional coupler insertion loss must be subtracted from the total output power. Thicker traces or specialized substrates help minimize these unwanted effects.
The loss often increases as the operating frequency rises due to the skin effect.
Heat Dissipation
Energy lost during transmission transforms into thermal energy within the device housing. High directional coupler insertion loss in a high-power system can lead to component failure if the heat is not managed. Enclosures must provide a path to the ambient air or a cold plate.
Designers check the thermal rating of the coupler against the expected continuous wave power.
Budget Allocation
System integrators must account for every fraction of a decibel in the chain. Excessive directional coupler insertion loss might require a more powerful amplifier. Verification occurs during the bench test phase where the input and output powers are compared directly.
Keeping this loss below zero point five decibels is standard for many cellular infrastructure parts.