Meaning
Computational adjustment applied to measured electromagnetic emissions to account for the actual transmission time of a radio device. Using duty cycle scaling ensures that average power measurements represent the actual operational behavior.
Mathematical Logic
Formulaic conversion of peak power to average power involves logarithmic subtraction based on the percentage of active transmission. When duty cycle scaling is applied, the measured value in decibels is adjusted by 10 times the log of the duty factor. This correction allows modules with low burst rates to meet regulatory limits.
Compliance Margin
Certification labs use these scaled values to demonstrate that a product stays within safe exposure boundaries during normal use. In instances where duty cycle scaling is used, the manufacturer must provide proof that the software prevents the radio from exceeding the stated timing.
Operational Constraint
Firmware limitations often dictate the maximum achievable power level allowed for a specific hardware configuration. Because duty cycle scaling depends on timing, any change to the packet structure requires a recalculation of the emission profile. The final report documents the source of the timing data.
This document proves that the duty cycle used during the test is representative of the worst case scenario in the field.