Meaning
Wireless coexistence protocols adjust transmission timing when multiple co-located radios operate simultaneously to prevent receiver desensitisation. Applying duty cycle suppression mitigation ensures that the primary radio module maintains a minimum throughput threshold even when a secondary transmitter forces transmission pauses. This technique balances the thermal and interference budgets of compact integrated devices.
Mitigation Strategy
Implementation of these mitigation schemes depends on direct hardware signalling between modules. When the secondary radio asserts a priority signal, the primary radio uses duty cycle suppression mitigation to restructure its packet transmission schedule rather than suspending operation completely. This approach prevents link timeouts and maintains connection stability during intensive data transfers.
Integration Procedure
System designers evaluate this process by measuring throughput under worst-case interference scenarios during formal certification testing. Proper calibration of duty cycle suppression mitigation prevents the board from overheating while maintaining radio link budget requirements. The final test verification confirms that the module remains compliant with regulatory duty cycle limits under all operating states.
Compliance Verification
Testing laboratories assess the operational limits by running continuous transmission loops across all active bands. A successful application of duty cycle suppression mitigation keeps spurious emissions within limits without triggering firmware-induced system resets. This verification establishes that the integrated product satisfies the co-location requirements of the European Radio Equipment Directive.
The evaluation involves documenting the duty cycle behaviour under thermal stress to verify that the attenuation levels are sufficient.