Meaning
Mechanical tension induced in a bolt during assembly increases or decreases when the temperature of the joint changes. This adjustment in clamping force, termed fastener thermal preload, arises from the mismatch in the coefficients of thermal expansion between the metal screw and the clamped casing materials. Component design must account for this variation to ensure that the joint neither loosens nor crushes the underlying housing under operational temperature extremes.
Expansion Differential
The magnitude of fastener thermal preload depends heavily on the materials used for the screw and the boss. When a steel screw secures an aluminum housing, the aluminum expands faster than the steel at high temperatures. This differential expansion compresses the joint further, raising the tension beyond the initial installation value.
If the temperature drops, the opposite occurs, and the bolt loses some of its clamping force. For plastic enclosures, the effect is even more pronounced because polymers expand up to ten times faster than metals. This expansion forces designers to use metal inserts in the plastic boss to absorb the local stress.
Clamping Risk
Evaluating the limits of fastener thermal preload is necessary for avoiding mechanical failures in ruggedized outdoor enclosures. When the joint undergoes extreme heating, the increased preload can exceed the yield strength of the fastener or strip the threads in the housing. Stripped threads lead to a total loss of sealing and allow moisture ingress.
On the cold side, the loss of preload can loosen the fastener, which exposes the system to vibrational failure. Testing programs must therefore measure clamping forces across the entire temperature range.
Assembly Protection
During the engineering qualification of an integrated product, engineers can select specific washer materials or thread engagement lengths to mitigate these effects. Solder joint failures on adjacent boards are minimized by keeping the mechanical stress in the chassis low. Stiff spring washers can absorb the expansion difference without transferring excessive load to the joint.
This configuration ensures the physical seal remains intact and prevents structural deformation of the enclosure.