Meaning
Optical registration system that uses dedicated marks to orient a board within automated machinery. Successful fiducial alignment allows the pick and place machine to compensate for small shifts or rotations in the board position. These marks are typically circular copper pads cleared of solder mask to provide high contrast.
The camera locates the center of these points to establish a local coordinate system. Without these marks, the machine would rely solely on mechanical stops which lack the necessary precision for modern electronics.
Optical Recognition
Contrast between the shiny copper and the laminate is vital for the sensors. Most systems use a ring of bare board around the mark to prevent interference from nearby traces. Proper lighting inside the machine ensures the software identifies the shapes quickly.
Placement Precision
Mechanical tolerances of the conveyor system are often too loose for modern fine pitch components. By using fiducial alignment, the machine adjusts the landing position for every part on the individual board. This calibration happens in milliseconds before the assembly begins.
Global Reference
Marks located at the corners of a panel provide the primary orientation for the entire sheet. Local marks near large microprocessors provide a second level of accuracy for critical components. Using both types ensures the highest yield for complex designs.