Meaning
Computational method for predicting temperature distribution and heat flow within a complex physical structure. Simulation software uses finite element thermal analysis to divide a device geometry into small discrete elements where heat transfer equations are solved locally.
Mesh Generation
Subdividing a three-dimensional model into a grid of nodes and elements allows for the representation of varied materials. During finite element thermal analysis, the density of the mesh increases around heat sources like power amplifiers or processors to capture steep temperature gradients. Accurate results depend on the quality of this geometric discretization and the definition of contact resistances between components.
Boundary Condition
Assumptions regarding ambient temperature and airflow define the environment in which the model operates. Application of these constraints to the finite element thermal analysis allows for the simulation of worst-case scenarios such as a device operating in a sealed enclosure at high altitude or in direct sunlight. Convection coefficients and radiation properties are assigned to the external surfaces to account for all modes of heat rejection, including the radiative exchange between internal boards.
Design Validation
Virtual prototyping identifies potential hotspots before the first physical boards are manufactured. Results from finite element thermal analysis guide the placement of heat sinks and the selection of thermal interface materials. Comparing the simulated temperatures with actual measurements from thermocouples during thermal testing validates the accuracy of the model for future iterations.