Meaning
Gradual removal of tool material from mold cavities or extrusion dies resulting from the abrasive contact of glass-reinforced polymers. Long production runs of structural enclosures often suffer from glass fiber erosion in areas of high turbulence. The hard glass shards scrape against the metal surface during every injection cycle.
This process eventually rounds off sharp corners and destroys fine textures.
Wear Pattern
High-velocity zones near the gate or around thin ribs show the most severe glass fiber erosion. Operators find that glass fiber erosion creates a matte or pitted appearance on once-polished surfaces. These changes in the tool surface are mirrored on the molded parts, leading to cosmetic rejections.
Tooling Protection
Hardened steels and specialized coatings are the primary defenses against glass fiber erosion. Applying a layer of chrome or a nitrided finish helps the mold withstand the constant abrasion. The choice of material for the mold must account for the specific percentage of glass filler in the resin.
System Consequence
Dimensional accuracy fades as glass fiber erosion increases the internal volume of the mold cavity. Wall thicknesses may grow beyond the design limit, adding weight and cost to the final product. Regular surface audits ensure that glass fiber erosion does not reach a level where the part no longer fits into the final assembly.
Such audits are especially critical when using resins with high fiber loading.