Meaning
Physical arrangement of woven fiberglass yarns in a printed circuit board laminate determines the spatial distribution of the dielectric constant. This physical structure, referred to as the glass weave style, influences the speed at which electrical signals propagate through adjacent traces. Because glass has a dielectric constant of approximately six while the epoxy resin has a value of roughly three, a non-uniform distribution causes variations in signal velocity.
This property is fixed by the cloth density and yarn thickness selected during substrate manufacturing.
Weave Configuration
Woven glass fabrics are classified by standard industry designations that specify thread counts and yarn diameters. A loose glass weave style like style 1080 has large gaps between yarn bundles, while a dense style like style 3313 has a tight and uniform arrangement. Trace signals passing over resin rich gaps experience different propagation speeds compared to traces running directly over the glass bundles.
These localized variations in the dielectric constant create differential skew in high speed serial lanes.
Skew Management
Propagation delay differences between the two traces of a differential pair can close the receiver eye. This skew arises when one trace runs over a glass bundle while its partner runs over a resin gap, which is a direct consequence of the glass weave style used in the laminate. Engineers use angled trace routing or spread glass fabrics to mitigate this effect.
Reducing the gap size between fibers prevents the signal pair from encountering different dielectric averages.
Material Selection
Designer specification sheets must explicitly designate the glass cloth type for high speed interfaces. This selection defines the cost and performance of the substrate. Tight weaves are preferred for high speed links.