Meaning
Ratio of the chemical etch depth to the lateral undercut of a printed circuit board copper trace defines the slope of the trace sidewalls. This geometric ratio, known as the trace etch factor, describes the deviation of a trace cross section from a perfect rectangle to a trapezoid. The parameter determines how closely the manufactured trace geometry matches the layout database design.
It governs the cross sectional area of the conductor, which directly affects impedance calculations and current carrying capacity.
Geometric Deformation
Chemical etchants spray onto the copper foil and dissolve the metal vertically and horizontally. This multi-directional action creates a trapezoidal cross section, making the top of the trace narrower than the bottom, which is quantified by the trace etch factor of the trace. A high factor indicates nearly vertical sidewalls, while a low factor indicates a pronounced trapezoidal shape.
This deformation must be modeled during the design phase to prevent impedance mismatches on high speed lines.
Electrical Influence
Conductor impedance depends heavily on the cross sectional area of the signal trace. Because a lower trace etch factor reduces the average width of the conductor, it increases trace impedance. Signal losses also increase due to the higher resistance of the narrower trace top.
High frequency transceivers are sensitive to these geometric changes, which alter propagation delay and return loss.
Process Optimization
Fabrication engineers adjust dry film exposure and etchant chemistry to maximize the ratio. This action maintains trace geometry consistency.