Meaning
Woven fiberglass styles establish the structural core of composite printed circuit board laminates. The specific glass weave dictates both the mechanical stability and the electrical uniformity of the substrate used in high-frequency hardware. It consists of glass yarns interlaced at right angles to create a stable fabric.
Dielectric Uniformity
Variations in the density of the glass weave create localized fluctuations in the dielectric constant across the board. High-speed signals traveling over these non-uniform regions experience differential skew and signal degradation. Board designers select tightly bound fabrics to mitigate these electrical discontinuities.
Mechanical Strength
The orientation of the yarn provides the necessary tensile strength to withstand thermal stress during the solder reflow process. Coarse patterns resist warping better than fine patterns but are more difficult to drill. The fabric choice therefore represents a compromise between structural rigidity and processing ease.
Laser Drilling
Laser pulses drill microvias at different rates when encountering the glass filaments compared to the surrounding resin. A dense glass weave minimizes the risk of uneven via formation by presenting a more uniform ablation target. This consistency improves the yield of high-density interconnect substrates.
When the laser encounters a thick bundle of fibers instead of pure resin, the ablation process slows down, which can lead to incomplete via holes and subsequent plating failures.