Meaning
A dimensional metric defines the depth of the precious metal layer deposited on electronic contacts. In interconnect engineering, gold plating thickness dictates the wear resistance and electrical reliability of mating pins and surface-mount pads. The value is measured in micrometres or microinches depending on the application standard.
It governs the lifetime of terminal contacts that experience repeated insertion cycles.
Solderability Assessment
Surface-mount boards often require a gold finish to protect copper pads from oxidation. Excessive gold plating thickness can lead to gold embrittlement in the solder joint, creating a fragile connection that fails under mechanical vibration. Assemblies must utilize controlled plating processes to keep the gold level below the threshold where embrittlement occurs.
Contact Wear
Mating cycles of coaxial connectors scrape the gold layer from the base metal. When the gold plating thickness is too low, the underlying nickel or copper becomes exposed and oxidizes rapidly. This oxidation increases contact resistance and leads to signal degradation.
Adequate thickness ensures long-term contact integrity.
Verification Test
Quality assurance departments check plated surfaces before board population. X-ray fluorescence systems measure the gold plating thickness without damaging the component. This non-destructive test confirms compliance with engineering drawings before final assembly begins.