Meaning
Volumetric measurements of unintended electromagnetic fields often trace back to voltage fluctuations across the reference conductive surfaces of a printed circuit board. These spatial voltage variations create ground plane common-mode noise when return currents from high-speed data lines flow through a shared impedance. As ground plane common-mode noise propagates along the conductive board, it drives external cables or metallic enclosures as antennas, resulting in high levels of unwanted radio emissions.
This propagation can cause a device to fail radiation standards during compliance testing.
Coupling Path
Asymmetry in differential signal traces or poor return path routing converts differential signals into common-mode currents. These currents flow back to the source through the ground plane rather than the designated return traces, generating ground plane common-mode noise along the way. The noise then couples to nearby antennas or IO ports, degrading the reception of wireless modules.
Shielding Efficiency
Interference of this kind is difficult to suppress because it bypasses conventional board-level shields. Since the ground plane common-mode noise is present on the reference plane itself, attaching a shield can to that plane does not prevent the noise from radiating into the environment. Filtering of all connected cables at the board edge is required to block this radiation path.
Layout Optimization
Prevention of voltage gradients across the reference plane relies on maintaining a continuous and uninterrupted ground return path. Designers avoid splitting ground planes under high-speed traces, as these splits force return currents to take long paths and generate ground plane common-mode noise. Careful routing of high-speed lines ensures clean return paths and minimises noise emissions.