Meaning
Thermal annealing processes conducted at extremely low atmospheric pressures can reduce the internal stresses of metallic assemblies without causing surface oxidation. Implementing high-vacuum stress relief ensures that reactive metals such as titanium do not absorb embrittling gases during the heating cycle.
Pressure Control
Vacuum levels below one-thousandth of a pascal are maintained inside the heating chamber to prevent chemical reactions. During high-vacuum stress relief, the removal of oxygen and nitrogen prevents the formation of a brittle alpha case on the surface of the components. This environmental control is necessary when treating parts with intricate geometries or tight tolerances, where any surface contamination would require expensive mechanical milling or acid etching to remove.
Residual Stress
Relaxation of internal elastic strains occurs through dislocation climb and glide at elevated temperatures. After high-vacuum stress relief, the assembly exhibits improved dimensional stability during subsequent precision machining operations. This step is specified for aerospace brackets and medical implants to prevent deformation under operating loads.
Cycle Parameters
Heating and cooling rates are carefully controlled to prevent thermal gradients from reintroducing internal strains. The soaking phase of high-vacuum stress relief is maintained for several hours depending on the section thickness of the thickest component. Gradual cooling under vacuum completes the cycle, delivering a stress-free and clean surface.