Meaning
Dual-level trigger boundaries establish separate activation and deactivation signal levels in comparator circuits and digital signal processing algorithms. Applying a hysteresis threshold prevents rapid, erratic switching outputs when noisy input signals hover near a single detection level. Touch sensing controllers set an upper signal count threshold to register a touch event and a distinct lower threshold to release it.
Signal conditioning stages rely on this differential switching behavior to maintain control system stability. This mechanism governs state transitions in user interfaces and power management circuits.
State Transition
Output states remain latched in the active condition until the measured input signal drops below the lower trip point. The voltage difference between the high turn-on level and low turn-off level defines the hysteresis window width. Signal noise with peak-to-peak amplitude smaller than this window cannot force premature state chatter.
Noise Immunity
Digital firmware implementation maintains a state variable that changes state only when filtered sensor counts cross the specified high or low limits. Subtracting or adding threshold offsets based on current switch state dynamically alters comparator sensitivity. This feedback loop eliminates false trigger pulses caused by supply rail ripple or coupled radio frequency noise.
Boundary Limit
Excessively wide hysteresis windows introduce noticeable lag into touch response performance, creating a sluggish user experience. Narrow hysteresis windows fail to suppress high-amplitude burst noise, causing rapid output flickering. Temperature variations that drift past threshold boundaries force software algorithms to dynamically adjust switching points.