Meaning
Evaluation methods for printed circuit board land arrays verify the electrical coplanarity and mechanical mating of array pads under compression. This land grid array testing ensures that multi-pad modules establish reliable connections with host board spring contacts before final deployment. The process involves pressing the module into a specialized fixture to measure contact resistance across all nodes.
This method operates below the deformation limits of the substrate and contact pins to prevent damage to the under-test module.
Compression Interface
Mechanical fixtures exert a highly uniform force across the entire top surface of the module. During land grid array testing, uneven loading can bend the substrate or bend internal contacts. This force must be sufficient to overcome planarity deviations without crushing the spring probes.
Engineers determine the budget for compression by analyzing the tallest and shortest pins in the array.
Signal Transmission
High-frequency signals require specialized low-inductance contact tips inside the test socket. While conducting land grid array testing, signal attenuation is minimized by selecting short, gold-plated spring probes. Measurement routines capture return loss and insertion loss during simulated operating conditions.
Failure Detection
Automated test equipment logs high-resistance anomalies that point to contaminated pads or warped substrates. In typical assembly runs, land grid array testing reveals solderability issues before the module is permanently soldered down. Pinpointing failing nodes early prevents the scrappage of expensive multi-layer printed circuit boards.
It reduces rework costs by identifying defective parts before reflow.