Meaning
Non-contact instrumentation measures the dynamic velocity and displacement of vibrating surfaces by analyzing the frequency shift of reflected light. This method of laser doppler vibrometry utilizes the Doppler effect to capture high-frequency mechanical oscillations. The technique functions across microscopic electronic components and heavy industrial structures, though it fails when measuring transparent materials or surfaces without reflective properties.
Measurement Principle
Frequency shifts occur when the sensor beam reflects from a moving target. In laser doppler vibrometry, the Doppler shift is proportional to the target velocity. The sensor resolves these shifts using interferometric detection.
Optical Configuration
A helium-neon laser or diode source generates the coherent light beam, which a beam splitter divides into reference and measurement paths. The measurement beam travels to the vibrating target while the reference beam remains inside the instrument, where a Bragg cell shifts its frequency to allow directional detection. When the reflected light recombines with the reference light, a photodetector monitors the resulting interference pattern to extract the velocity of the target.
Application Limit
Surface roughing or retroreflective treatment is necessary when target reflectivity is low. Dropouts in the signal occur if the reflected light cannot reach the collection optics. High ambient light levels also introduce noise.