Meaning
Modulation technique that utilizes chirped pulses to transmit data over long distances with minimal power consumption. The application of lora spread spectrum allows for low bit rate communication in environments with high interference levels. It maps symbols to frequency changes that occupy a wider bandwidth than the information rate requires.
Interference Resistance
Signal robustness is the primary advantage of spreading the energy across a broad frequency range. By using lora spread spectrum, a receiver can extract data from signals that are below the thermal noise floor. This capability is achieved through the processing gain inherent in the spreading factor, which determines how many chirps represent a single bit.
Higher spreading factors increase the range but reduce the data rate, allowing the designer to tune the link for specific terrain.
Receiver Sensitivity
Gateway performance depends on the ability to decode multiple simultaneous transmissions on the same channel. In lora spread spectrum, signals using different spreading factors are orthogonal to each other, meaning they do not interfere. This allows a single antenna to manage thousands of sensors.
Power Profile
Battery operated devices benefit from the short transmit times and high sensitivity of the protocol. Implementing lora spread spectrum enables years of operation on a single cell. This efficiency supports the deployment of large scale remote monitoring grids.