Meaning
A regulatory power allocation category restricts wireless transmitter operation to internal building environments while enforcing reduced output power limits. This classification enables shared spectrum usage in bands occupied by incumbent primary radio services. A low power indoor device operates under strict equivalent isotropically radiated power limits and must receive power exclusively from an integrated AC power connection or local wired source.
The designation applies to high-bandwidth Wi-Fi access points and client modules operating in the six gigahertz band. Compliance obligations cease once a device transitions to outdoor power sources or uses external weatherproof enclosures.
Power Limit
Maximum allowed transmit spectral density is tightly restricted to protect satellite uplink receivers from aggregate interference. Transmitters operating under this rule operate at power levels five to ten decibels lower than standard power access points. The low power indoor classification permits wider channel allocations without requiring automated frequency coordination systems.
Operating at thirty-two decibels milliwatt total power maintains high local throughput while preventing signal leakage beyond building walls.
Enclosure Constraint
Physical hardware design rules prohibit weatherized housings and external detachable antennas. Devices are permanently assigned to internal wall or ceiling mounts. A low power indoor product must incorporate integrated antennas to prevent users from attaching high-gain directional radiators.
Spectrum Allocation
Regulatory test reports verify compliance with radiated power spectral density limits before market launch. The FCC regulatory test report confirms that radiated emissions remain below permissible thresholds across all supported channels. Low power indoor equipment maintains strict spectrum boundaries to ensure peaceful coexistence with fixed point-to-point microwave links.