Meaning
Japanese regulatory ordinance specifies the technical requirements for low-power data communication systems in the 2.4 GHz band. Compliance with mic article 2-1-19 is mandatory for any Bluetooth or Wi-Fi device sold in Japan. This rule falls under the scope of the Radio Act enforced by the Ministry of Internal Affairs and Communications.
It defines limits for output power and occupied bandwidth.
Frequency Allocation
Devices must operate within the designated range from 2400 to 2483.5 MHz. Under mic article 2-1-19, the use of frequency hopping or wideband modulation determines the specific power density allowed. The rules prevent interference with other local radio services.
Strict adherence to these bands ensures that consumer electronics do not disrupt infrastructure.
Emission Limit
Spurious radiation outside the operating band must stay below defined thresholds to prevent noise pollution. Testing for mic article 2-1-19 includes measurements of leakage power and secondary emissions. The maximum antenna gain is also restricted to keep the effective radiated power within legal bounds.
These technical constraints maintain the quality of the shared spectrum.
Certification Route
Manufacturers must submit test reports to a registered certification body to gain the mark. The mic article 2-1-19 procedure requires evidence that the radio module cannot be easily modified. Once approved, the product is listed in the official database.
This approval is a prerequisite for entering the Japanese market.