Meaning
A physical and link layer protocol used for streaming debug and trace information from a mobile or embedded device. The mipi stp v2 specification provides an efficient way to multiplex multiple data sources into a single serial stream. This allows for the simultaneous capture of processor trace and system logs over a limited number of pins.
Data Framing
High-speed trace requires an organized method for packing variable-length data into a stream. Within the mipi stp v2 protocol, information is formatted into packets that include channel identifiers and timestamps. This structure allows a debugger to reconstruct the original data from each source.
The framing logic handles the overhead of packet headers to ensure the payload is delivered correctly.
Bandwidth Management
The second version of this protocol introduces improvements in data density and synchronization. A mipi stp v2 implementation reduces the number of idle cycles on the bus to maximize throughput. It uses a master-slave architecture where the master controls the timing of the transmission.
This ensures that time-critical trace data receives priority over lower-importance diagnostic messages.
Hardware Specification
Designing an interface for this standard requires matching the electrical characteristics of the physical layer. Matching the electrical characteristics requires specific connectors and cables that support the high clock rates. The specification defines the voltage levels and signal integrity requirements for the link.
Compliance with these rules is required for the device to interoperate with standard laboratory equipment.