Meaning
Regulatory authorizations issued by telecommunications commissions specify operational constraints and physical installation boundaries under which a pre-certified radio module can be integrated into host enclosures without triggering full device re-certification. These modular approval grant conditions dictate allowable antenna gain figures, host separation distances, multi-transmitter restrictions and trace routing geometries. The parameters govern both full modular approvals and split or limited certifications, defining the administrative boundary between original equipment manufacture and third-party host integration.
The conditions cease to apply whenever an integrator modifies the physical radio circuit layout, adds an antenna with higher gain than previously approved, or decreases the host operating separation distance below the specific absorption rate testing threshold.
Trace Design
Host printed circuit boards interfacing with modular transmitters without integrated antennas must replicate the exact microstrip transmission line geometry authorized on the original grant filing. Microstrip trace widths, substrate dielectric constants, ground plane cutouts and bypass component placements must adhere strictly to the manufacturer’s layout layout blueprint. Deviation from approved transmission line impedances alters spurious harmonic emissions, requiring supplemental laboratory verification.
Certification test reports establish strict dimensional tolerances down to millimeter increments for external trace runs connecting the module pin to the host antenna connector.
Integration Constraints
Grant certificates explicitly delineate operational boundaries between mobile host classifications and portable host configurations. Portable devices that operate within twenty centimeters of the human body fall outside standard fixed-distance grants, mandating dedicated specific absorption rate testing for the combined host product. Co-location provisions forbid simultaneous transmission with adjacent radios inside the same host unless multi-transmitter evaluation demonstrates that cumulative field levels remain below regulatory limits.
Installers verify that host labeling visibly exposes the module certification identifier or reproduces it through an electronic display menu.
Handover Documentation
Host assembly packages must contain the original grant document paired with an engineering attestation certifying that physical trace layouts, antenna selections and separation boundaries match the modular filing. Filing an administrative Class II permissive change becomes mandatory if the host design alters antenna directivity, firmware power limits or thermal mitigation schemes beyond certified parameters.