Meaning
Regulatory alpha-numeric certification strings designate factory-assembled wireless sub-systems that have completed compliance testing as independent, stand-alone communication nodes. Authorized by market regulators, a modular grant identifier permits original equipment manufacturers to integrate pre-certified transceivers into end-use host assemblies without re-executing foundational radio emissions testing. This administrative status governs standardized transmitter platforms meeting distinct antenna, power supply and shielding rules, stopping short of exempting host assemblies from unintended radiator checks or body-worn absorption evaluations.
Host Integration
Physical and electrical host integration dictates whether a modular grant remains legally valid or requires permissive change filings. The host board must supply stable DC bus voltages to the wireless module, matching the ripple limits and power regulation tolerances defined inside the original grantee hardware integration manual. Layout routing for external antenna traces must replicate the exact microstrip geometries, ground stitch patterns and coplanar wave-guide dimensions documented in the module grant filing.
Deviating from specified antenna types, exceeding declared peak gain figures or altering trace impedance invalidates the original authorization, transforming the assembly into an uncertified transmitter.
Labeling Architecture
Finished commercial products incorporating pre-approved transceivers must display regulatory compliance verbiage on external product nameplates. Host enclosures carry clear, legible text statements declaring that the unit contains a certified transmitter referenced by its alphanumeric assignment. Internal digital displays satisfy this marking rule under electronic labeling provisions if users can access system regulatory menus within three navigation steps from the primary display interface.
Omission of this external reference during production packaging constitutes a regulatory non-conformance, risking customs seizures or market stop-sale orders.
Permissive Filing
Changes to host physical packaging, integration distances or co-located transmitter arrangements trigger structured assessment paths under Class I or Class II permissive change frameworks. Co-locating the module alongside secondary transceivers such as Bluetooth or satellite radios requires formal evaluations of intermodulation products and simultaneous exposure conditions. Class II permissive change filings require accredited test laboratories to measure radiated spurious emissions and calculate specific absorption rates in the specific host mechanical environment.
Formal test reports then merge into the public regulator database under the original modular registration.