Meaning
Industrial standards classifying the moisture sensitivity of electronic components during surface mount assembly protect the integrity of semiconductor packages. This classification, known as MSL 3, defines the allowable time limits for exposing unsealed components to ambient humidity before soldering. The rating dictates the handling and storage requirements on the manufacturing floor.
Devices exceeding this threshold must be baked to remove moisture.
Floor Life
Exposing parts to open air on the factory floor must be monitored using time tracking software or cards. For parts with an MSL 3 rating, the allowable floor life is limited to 168 hours under standard conditions of 30 degrees Celsius and 60 percent relative humidity. This period starts when the hermetic bag is opened and stops when the components are reflowed.
Recording this timeline prevents component degradation during the reflow process.
Thermal Damage
Trapped moisture inside plastic packages vaporizes during the rapid heating of reflow soldering. For devices classified as MSL 3, failure to observe the floor life limits results in internal pressure that can lead to package cracking or interface delamination. This cracking is often called popcorning due to the rapid release of steam.
Solder defects and electrical failures typically follow such physical damage.
Packaging Rule
Dry packaging remains mandatory for storing sensitive devices before distribution. To comply with MSL 3 requirements, manufacturers must seal the parts in moisture barrier bags with desiccant and a humidity indicator card. This indicator allows assembly technicians to verify that the components remained dry during shipping.