Meaning
Distributing electrical current evenly across three-dimensional transistor channels is a major challenge in advanced node semiconductor design. The occurrence of multi fin current crowding leads to some fins carrying more current than others, which reduces the reliability of the transistor. This uneven distribution typically occurs when the layout of the source and drain contacts favors a shorter current path.
It degrades the performance of high-drive digital cells.
Physical Cause
Parasitic resistance in the source and drain extension regions forces the current to take the path of least resistance. In multi fin current crowding, the fins closest to the contact vias experience the highest current densities. This creates a non-uniform distribution of current among the parallel fins.
The outer fins of the structure are often underutilized as a result.
Thermal Impact
The localized concentration of current in specific fins generates excess heat that cannot be easily dissipated. Under the influence of multi fin current crowding, the hottest fins experience elevated thermal stress. This increases leakage currents.
Layout Solution
Mitigating this layout defect requires optimizing the contact geometry to equalize the resistance to each individual fin. Design tools resolve multi fin current crowding by using continuous contact trenches rather than isolated square vias. This contact style ensures that the current enters all fins at the same resistance level, which protects the device from early failure.
It also improves the drive strength of the logic gate. Designers verify this distribution using detailed parasitic extraction tools.