Meaning
Mechanical characterization techniques utilize a sharp probe of known geometry to measure the localized elastic and plastic response of a material at the sub-micrometer scale. Through this method, nanoindentation yields quantitative values for hardness and young’s modulus without needing to isolate large specimens. This process applies controlled forces in the millinewton range while measuring the depth of penetration with nanometer resolution.
The technique is applicable to thin films, provided the indentation depth remains below ten percent of the film thickness to avoid substrate interference.
Elastic Recovery
Deformation curves recorded during the test record both the loading and unloading phases of the deformation cycle. During nanoindentation, the initial portion of the unloading curve represents the elastic recovery of the material, from which the contact stiffness is calculated. This analysis relies on the Oliver-Pharr method to extract the reduced elastic modulus.
Tip Calibration
Area function profiles of the indenter tip must be determined precisely using reference materials of known elastic properties. In the practice of nanoindentation, calibrating a Berkovich or spherical tip accounts for any rounding or deviations from the ideal geometry at the very apex. This calibration ensures that the calculated contact area is accurate for shallow indentations.
Material Analysis
Structural integrity relies on precise local testing to determine how processing conditions affect the structural integrity of deposited barriers. By executing nanoindentation, engineers can evaluate the yield strength and fracture toughness of metal lines and dielectric layers on a silicon wafer. This information guides the optimization of deposition parameters to prevent delamination during subsequent packaging steps.