Meaning
Spatial interaction between two antennas where the signal from one transmitter creates harmonic or intermodulation distortion in the structure of the other. Occurrence of non-linear antenna coupling often happens when high power signals strike metallic junctions or corroded surfaces on a nearby antenna.
Physical Cause
Metal to metal contacts with poor conductivity act as diode like junctions that rectify the incident radio frequency energy. During non-linear antenna coupling, these junctions reradiate new frequencies that interfere with legitimate communications. This effect is particularly problematic in antenna arrays where spacing is tight and power levels are high.
Interference Effect
The generated noise floor elevation can mask weak incoming signals and reduce the effective range of a receiver. Linear coupling transfers the signal without distortion whereas non-linear antenna coupling changes the frequency content of the reflected energy. Engineers identify this problem by observing spectral regrowth that does not originate from the transmitter itself.
Rectification of the issue often requires cleaning connectors or replacing damaged antenna components to restore linear behavior. In many cases, the physical location of the nonlinear source is difficult to pin down because it radiates like an independent transmitter. Careful torque application on connectors minimizes the creation of these unwanted junctions during installation.
Diagnostic Measurement
Measuring the reflected intermodulation products while two carriers are active provides a way to quantify the severity of the interaction. Specialized test equipment helps isolate the source of the nonlinearity within the antenna system.